This is the fastest in the industry and great for all types of nail work, from sculpting, buffing, to polishing. It features a professional foot pedal control and digital power supply source for a steady, precise speed setting.Your new drill comes with everything you need to get started and more!Note: Pls kindly be noted the 6th picture"how to insert the bit".Operation Detail:
plug in the electric cord of the transformer to the main electric outlet
turn on the on/off switch on the transformer.(machine should be at the lowest speed when turning on)
select the desired speed by turning the variable speed control knob on the transformer
The black switch in front of the transformer, next to the speed control selection knob is for forward and reverse rotation direction
To use the foot pedal control,connect the end of the cord from the foot pedel to the out put hole at the front of the transformer and press down on the foot pedal
To secure the bits:
A.Turn the blue rubber sleeve to the R side's end. B.Push in the desired bit firmly into the hole. C.Turn the blue rubber sleeve to the S side's to close.
To remove the bits: turn off the machine,twist the blue rubber sleeve to the S side's end to open the chuck,then plug off it.
Always unplug the tool when you change accessory or collect
Do not engage the shaft lock button while the tool is running
Do not use near or place in water.if motor falls into water, unplug immediately.
Do not touch the bit after use. The bit is too hot to be touched by bare hands
Keep dust out of eyes and lungs by using protective eyewear or a dust mask
Turn speed control to minimum before turning off and switch the main power source to 0.
Always unplug it and clear the dust after use
When the machine is not in use, all tool must be stored in a dry location abd keep out of reach of children.
|Shipping Weight||5 pounds|